Leather Reciprocation Abrasion Testing Machine ULB-F14
Application
This machine assesses the abrasion resistance of sole leather materials.
Operation Process
Setup: Place two square test samples on a standard abrasive surface.
Testing: Apply a constant force to move the samples in a reciprocating motion.
Dust Control: Activate the air extraction system to remove dust, preventing measurement errors.
Abrasive Flow: Ensure the abrasive agent flows beneath the samples for even contact.
Results: Calculate the average thickness reduction rate per thousand cycles, excluding the last ~1.0 mm of the sample.
Testing: Apply a constant force to move the samples in a reciprocating motion.
Dust Control: Activate the air extraction system to remove dust, preventing measurement errors.
Abrasive Flow: Ensure the abrasive agent flows beneath the samples for even contact.
Results: Calculate the average thickness reduction rate per thousand cycles, excluding the last ~1.0 mm of the sample.
Benefits
1. Reduces material waste by identifying weak points early.
2. Complies with international footwear testing protocols.
3. Leather Reciprocation Abrasion Tester: low maintenance with durable components.
2. Complies with international footwear testing protocols.
3. Leather Reciprocation Abrasion Tester: low maintenance with durable components.
Key Specification
|
Model |
ULB-F14 |
|
Standards |
IS 6721-2023 ANNEX B |
|
Position |
2 |
|
Area of testing head |
25.5 mm × 25 mm |
|
Movement speed |
30 ± 5 times / min. |
|
Rubbing stroke |
216 mm |
|
Rubbing finger mass |
35.0 N ± 0.5 N |
|
Sample size |
25 mm ± 0.5 mm square |
|
Abrasive paper |
Coated with silicone carbide of grit size 80 X |
|
Power supply |
1∮AC 220V 50/60HZ |
|
Dimensions (L x W x H) |
770x450x550mm |
|
Weight |
About 100kg |
Accessories
|
Standards accessories |
2pcs |
Steel plates |
|
1pc |
Power line |