Industory News

Digital Hydrostatic Head Tester is used to testing the waterproof properties of fabrics through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. One of the most important standards for testing the water resistance of fabrics is the hydrostatic head test...

This computer control Carton Compression Tester uses high-precision force sensor to test the resistance value of pressure and display it directly. The most direct equipment for testing the pressure resistance of containers made of cardboard or other materials. It is used to determine the cargo capacity and stackin...

If you want to know what is the influence factor of fabric hydrostatic test, you need to know what is hydrostatic head tester, and its working principle, so as to better understand the whole test, so as to better analyze its influence factor.

Box Compression Strength Tester with multi-function and high precision is designed to test the compressive strength of standard size corrugated box, or packages and containers made of other material with a compressive strength smaller than 100kN. With advanced mechanical structure of a pair of threaded shafts &gui...

Textile burst strength testThe bursting strength of the fabric refers to the phenomenon that when the fabric is partially subjected to an external force perpendicular to its plane, it expands and ruptures, which is called the bursting strength of the fabric. Commonly used bursting strength test methods are: hydrau...

First of all, ULABSTER briefly introduces the Martindale Abrasion and Pilling Tester ULB-T04.Martindale Tester To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of a...

The Universal testing machine is also called a tensile testing machine or a universal material testing machine. Tensile test of tensile testing machine: tensile test (stress-strain test) generally involves clamping the two ends of the material sample on two fixtures separated by a certain distance. The two clamps...

1. Make sure all wiring is correct before the test machine is operated and preheat for at least 15 minutes to package the stability of the sensor.2. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to...