Fabric Bursting Strength Tester ULB-T08A-2 (2).jpg

Fabric Bursting Strength Tester ULB-T08A-2 (3).jpg

Fabric Bursting Strength Tester ULB-T08A-2

Brand Ulabster
Product origin China
Delivery time About 30 days
Supply capacity 500 sets

Fabric Burst Tester ULB-T08A-2 using the standardized Mullen Test method (diaphragm method). It features an imported servo motor, automatic pneumatic clamping, and complies with international standards such as ISO 13938-1 and ASTM D3786. designed for evaluating the rupture resistance of textiles, non-wovens, and paper products.

product details

Application

The Fabric Bursting Strength Tester applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm.

Control System

1. This diaphragm bursting strength tester use hydraulic method, meet multinational standards and equipped with several changeable test clamp.

2. The simple interface touching screen controller is easy and simple to handle.

3. The specimen was clamped firmly by the pneumatic force which can also save effort.

4. The test cover was made up of high-transparent glass with LED light inside which can observe the specimen easily.

5. The machine can induct the burst automatically which is much more sensitive and reliable.

6. The bursting distension can go up to 75mm.

7. The AC servo drive system with low noise and wide range of applications.

8. 4 Test Methods: Constant Rate Bursting, Constant Expansion, Constant Pressure and Constant Time Bursting.

9. The hydraulic bursting strength tester bring saving and printing functions and support on-line operation.

10. Provide on-line interfaces, professional detection software which can be used to analysis testing result.

Standard

ISO 13938.1, FZ/T 60019, FZ/T 01030, ASTM D3786, BS 4768, WOOLMARK TM 29
WSP 30.1, JIS L 1018.6.17

Key Specification

Model	ULB-T08A-2
Standards	ISO 13938.1, FZ/T 60019, FZ/T 01030, ASTM D3786, BS 4768, WOOLMARK TM 29, WSP 30.1, JIS L 1018.6.17
Range	2.00MPA
The min. Division value	0.001Mpa
Test area	7.3 cm²(Φ30.5mm), 10 cm²(Φ35.7mm), 50cm²(Φ79.8mm), 100 cm² (Φ112.8mm) can be option
Thickness of rubber diaphragm	≤2mm
Pressure speed	20ml/min - 600ml/min
Maximum expansion height	75 ± 0.02mm
Testing units	Kpa, kgf/ cm², atm, mmHg, lb/in² free shift
Test method	- Constant Rate Bursting, - Constant Expansion, - Constant Pressure, - Constant Time Bursting
Output	Printer ,display output, and can be connected to the computer
Power supply	AC 220V 50/60HZ 200W
Dimensions	550×450×700mm
Net weight	125kg

Accessories

Standard accessories	1 set	Test set of 7.3cm²(φ30.5mm)
	1 set	Test set of 50cm²(φ79.8mm)
	1pc	Wrench
	1pc	Stainless steel calibration plate
	1pc	Rubber diaphragm
	1pc	English operation software
	1pc	Cable connect with PC
Optional accessories	Optional	Other test set
	Optional	Rubber diaphragm
	Optional	Air compressor