China Sole Flexing Tester ULB-F34 - Durable Flex Testing Solutions from Reliable Suppliers and Factory
Application
This tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.
EN Sole Flexing Tester Standards
SATRA TM161, ISO 17707, ISO20344 section 8.4.2, ISO20347 section 5.8.4, AS/NZS 2210.2 section 8.4.2
Features
- Automated Control: The automated control system supports one-click, fully automatic testing, ensuring easy operation and accurate data.
- Durable Construction: Bennewart flex tester mechanical components are made of non-corrosive aluminum and stainless steel, ensuring smooth rotation and long life. A protective cover ensures safe operation.
- Flexible Testing Capacity: EN Sole Flexing Tester simultaneous testing of three or six specimens is supported, significantly reducing test cycle times. Test parameters can be flexibly configured based on the characteristics of different materials (such as rubber, leather, and TPU).
- Advanced Data Analysis: Data analysis software processes test data and generates visual reports such as deformation curves, providing a scientific basis for product development and quality control.
Key Specification
| Model | ULB-F34-3 | ULB-F34-6 |
|---|---|---|
| Test position | 3 | 6 |
| Bending angle | 90±2 ° | |
| Bending speed | 125-150cpm | |
| Mandrel diameter | 30 mm | |
| Clamps apart | 110±1mm | |
| Movable fixture stroke | 41.5 ± 0.5 mm | |
| Counting | LCD, 0-9999999 | |
| Power supply | 1∮AC 220V 50/60HZ | |
| Dimensions | 105x42x55cm | 105x70x55cm |
| Weight | 80kg | 100kg |
Accessories
| Category | Quantity | Description |
|---|---|---|
| Standard accessories | 1 set | Spanner |
| 1 pcs | Chisel cutter (2mm) | |
| 1 pcs | Power line |
Frequently Asked Questions
What is the primary application of the EN Sole Flexing Tester?
This tester is specifically designed to measure the flexing resistance of shoe soles under continuous movement. It evaluates the durability of soles by checking the difference in incision length after a set number of flexing cycles.
Which testing standards does this sole flexing machine comply with?
The tester complies with multiple international industry standards, including SATRA TM161, ISO 17707, ISO20344 section 8.4.2, ISO20347 section 5.8.4, and AS/NZS 2210.2 section 8.4.2.
How many specimens can be tested at the same time?
Depending on the chosen model, you can test either 3 specimens simultaneously (Model ULB-F34-3) or 6 specimens simultaneously (Model ULB-F34-6), which helps optimize testing efficiency.
What materials can be tested on this equipment?
The test parameters are highly configurable, allowing you to test various materials used in shoe soles, including rubber, leather, and TPU.
What standard accessories are included with the tester?
The standard package includes 1 set of spanner, 1 piece of 2mm chisel cutter, and 1 power line.
What are the key mechanical specifications of the tester?
The machine features a bending angle of 90±2°, a bending speed of 125-150 cpm, a mandrel diameter of 30 mm, clamp separation of 110±1mm, and a movable fixture stroke of 41.5 ± 0.5 mm.