China Packaging Clamping Force Tester ULB-P06 - Essential for Suppliers & Factory Packaging Safety
Application
The packaging testing equipment is used for simulation when the clamp vehicle loading and unloading the package, the clamping force between two plywood impact on the package and goods, test and evaluate package’s clamp strength.
Why buy a package clamp force tester?
Product Protection
Simulates logistics clamping forces to prevent transport damage, especially for high-value goods.
Cost Optimization
Uses test data to refine packaging designs, avoiding overpacking and material waste.
Compliance Assurance
Meets international standards for export packaging requirements.
Customer Satisfaction
Reduces shipping damage complaints and enhances brand reputation.
Long-term ROI
Lowers return losses, improves logistics efficiency, and pays for itself over time.
Standards
- ISTA
- EN ISO 16047-2005 fasteners / clamping torque force test
- QMZ - J81.003-2012 product packaging evaluation method
- QMZ - J81.006-2013 experimental evaluation method and standard
Key Specification
| Model | ULB-P06 |
|---|---|
| Max. Capacity | 400~3000lb |
| Max. Specimen weight | 600kg (can be customized) |
| Sensor | 6 units |
| Motor | Servo motor, DC variable speed drive system, high-precision mechanical ball screw rod |
| Sensor Accuracy | 1/250,000 |
| Load precision | Within ±0.25% |
| Smoothness | Within ±2.5mm |
| Sensor resolution | 1/250,000 |
| Clamping Plate Size | Height 48 inch, depth 48 inch |
| Clamp Plate Adjustable height | 0-1,000mm |
| Clamp Plate Adjustable width | 200-2000mm |
| Base plate size | 2200×2100mm |
| Test speed | 0.25~2.5mm/sec (according to ISTA 6 -SAMS CLUB) |
| Software | Independent research and development system |
| Data display | Load, displacement, speed, loading rate, elapsed time |
| Function | The clamp can be up and down |
| Clamping plate requirements | Make the two clamping boards flat and non-deform under work condition (2000 pounds) and make clamping board’ parallel and clamping board and land vertical. Clamping board is thicker than 25mm. |
| Safety features |
1) E-Stop; 2) Over-load protection; 3) Upper and lower limit switches; 4) Load sensor with automatic retreat |
| Improve displacement and velocity | The lifting speed and displacement computer adjustable 0-1200MM, Improve accuracy of displacement shall prevail the ruler |
| The maximum allowable specimen height | 2.2m, adding displacement height 1.2m, equipment overall height about 2.8m |
| Packing dimension | 11.2CBM |
| Gross weight | 1000 kg |
| Power supply | Three-phase, 380±10%, 50/60HZ (Can be appointed) |
Frequently Asked Questions (FAQ)
What is the primary application of this clamp force tester?
The packaging testing equipment is specifically designed to simulate the clamping forces exerted by clamp vehicles during the loading and unloading of packages. It evaluates the package's clamp strength and the impact of the clamping force between two plywood boards on the goods.
Which international standards does the ULB-P06 comply with?
This system meets several key standards, including ISTA (specifically ISTA 6-SAMS CLUB test speeds), EN ISO 16047-2005 (fasteners / clamping torque force test), QMZ - J81.003-2012 (product packaging evaluation method), and QMZ - J81.006-2013 (experimental evaluation method and standard).
What safety mechanisms are built into the equipment?
The equipment is designed with multiple safety features, including an Emergency Stop (E-Stop) button, over-load protection, upper and lower limit switches, and a high-precision load sensor with an automatic retreat function to protect both the operator and the specimen.
Can the specimen weight capacity and dimensions be customized?
Yes. While the standard configuration supports a maximum specimen weight of 600kg, this capacity can be customized. The clamping plates support adjustable heights from 0-1,000mm and widths from 200-2,000mm to accommodate various package sizes.
What data does the built-in software track and display?
The independently developed software system provides real-time data monitoring and displays key metrics, including clamping load, displacement, test speed, loading rate, and elapsed time during the operation.