China Fabric Bursting Strength Tester ULB-T08A-2 - Reliable Suppliers and Factory for Quality Testing Solutions
Application
The Fabric Bursting Strength Tester applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm.
Control System
-
1.
This diaphragm bursting strength tester use hydraulic method, meet multinational standards and equipped with several changeable test clamp.
-
2.
The simple interface touching screen controller is easy and simple to handle.
-
3.
The specimen was clamped firmly by the pneumatic force which can also save effort.
-
4.
The test cover was made up of high-transparent glass with LED light inside which can observe the specimen easily.
-
5.
The machine can induct the burst automatically which is much more sensitive and reliable.
-
6.
The bursting distension can go up to 75mm.
-
7.
The AC servo drive system with low noise and wide range of applications.
-
8.
4 Test Methods: Constant Rate Bursting, Constant Expansion, Constant Pressure and Constant Time Bursting.
-
9.
The hydraulic bursting strength tester bring saving and printing functions and support on-line operation.
-
10.
Provide on-line interfaces, professional detection software which can be used to analysis testing result.
Standard
ISO 13938.1, FZ/T 60019, FZ/T 01030, ASTM D3786, BS 4768, WOOLMARK TM 29, WSP 30.1, JIS L 1018.6.17
Key Specification
| Model | ULB-T08A-2 |
| Standards | ISO 13938.1, FZ/T 60019, FZ/T 01030, ASTM D3786, BS 4768, WOOLMARK TM 29, WSP 30.1, JIS L 1018.6.17 |
| Range | 2.00MPA |
| The min. Division value | 0.001Mpa |
| Test area | 7.3 cm²(Φ30.5mm), 10 cm²(Φ35.7mm), 50cm²(Φ79.8mm), 100 cm² (Φ112.8mm) can be option |
| Thickness of rubber diaphragm | ≤2mm |
| Pressure speed | 20ml/min - 600ml/min |
| Maximum expansion height | 75 ± 0.02mm |
| Testing units | Kpa, kgf/ cm², atm, mmHg, lb/in² free shift |
| Test method |
- Constant Rate Bursting, - Constant Expansion, - Constant Pressure, - Constant Time Bursting |
| Output | Printer, display output, and can be connected to the computer |
| Power supply | AC 220V 50/60HZ 200W |
| Dimensions | 550×450×700mm |
| Net weight | 125kg |
Accessories
| Standard accessories | 1 set | Test set of 7.3cm²(φ30.5mm) |
| 1 set | Test set of 50cm²(φ79.8mm) | |
| 1pc | Wrench | |
| 1pc | Stainless steel calibration plate | |
| 1pc | Rubber diaphragm | |
| 1pc | English operation software | |
| 1pc | Cable connect with PC | |
| Optional accessories | Optional | Other test set |
| Optional | Rubber diaphragm | |
| Optional | Air compressor |
Frequently Asked Questions (FAQ)
Q1: What materials can be tested using the Fabric Bursting Strength Tester?
A: The tester is designed to measure the bursting strength and distension of woven, knitted, and non-woven fabrics, as well as paper and cardboard materials.
Q2: What test methods does the control system support?
A: The control system supports four distinct testing methods: Constant Rate Bursting, Constant Expansion, Constant Pressure, and Constant Time Bursting.
Q3: Which international testing standards does the ULB-T08A-2 comply with?
A: It complies with multiple global standards, including ISO 13938.1, ASTM D3786, BS 4768, FZ/T 60019, FZ/T 01030, WOOLMARK TM 29, WSP 30.1, and JIS L 1018.6.17.
Q4: What is the maximum expansion height of this tester?
A: The tester features a maximum expansion height of 75 ± 0.02 mm, driven by an AC servo system for precise and quiet operation.
Q5: Can the testing data be transferred and analyzed on a computer?
A: Yes. The device supports online operations and comes standard with a PC connection cable and professional detection software for advanced data analysis and reporting.
Q6: What standard test areas are available for the device?
A: The standard test areas provided are 7.3 cm² (Φ30.5mm) and 50 cm² (Φ79.8mm), with optional configurations for 10 cm² (Φ35.7mm) and 100 cm² (Φ112.8mm).