China DIN Abrasion Tester ULB-F32 - Reliable Suppliers & Factory for Rubber, Tire, and Elastic Material Testing
Application
The DIN Abrasion Resistance Tester is used to determine wear performance test of materials like elastic material, rubber, tires, conveyor belts, conveyor belts, shoe soles.
DIN Abrasion Tester Standards
DIN-53516
JIS-K6369
JIS K6264-2
GB/T 20991 section 8.3
GB/T 20265
GB20266-2006
GB/T 9867
EN ISO 20344 section 8.3
AS/NZS 2210.2 section 8.3
ISO 4649
BS903-A9 Method A
ASTM D5963
ISO20871
QB/T2884
EN 12770
Feature
- Body paint baking processed, easy for maintenance.
- DIN abrasion tester machine Equip with digital counter, automatically stop after test finished.
Principles
Under certain touching pressure and contact area, sample becomes a certain angle with sandpaper and determine its abrasion performance caused by a certain level of sandpaper. Pack sandpaper outside the surface of roller. The sample is pressed against the roller with sandpaper, which makes sample lateral moving along roller. Abrasion is caused under the other side of cylindrical specimens measuring the mass loss of sample value and count the wear amount by sample density.
Key Specification
| Model | ULB-F32 |
| Diameter of wear wheel | 150mm |
| Specimen dimension | ø16.2 mm x thickness 6-10 mm |
| Specimen moving speed | 4.2 mm/r |
| Weights | Holder 2.5N, can be used arbitrarily with optional accessory 2.5N, 5N (each for one) |
| Wear wheel speed | 40±1rpm |
| Inclination angle | 3°, Test piece support shaft of test piece becomes vertical angle with roller. |
| Grit size of sandpaper | #60 |
| Roller length | 460mm |
| Wear stroke | 40m |
| Power supply | 1∮AC 220V 50/60HZ 3A |
| Dimensions (L x W x H) | 700 x 300 x 300 mm |
| Weight | 55kg |
Accessories
| Standard accessories | 1pc | 2.5N weights |
| 1pc | 5N weights | |
| 1pc | P60# standard abrasive paper | |
| 1pc | Standard cutting die | |
| 1pc | Metal blob(Grinding head) | |
| 1pc | Power line | |
| Option accessories | Optional | Electronic balance (210g, accuracy 1mg) |
| Optional | Standard rubber |
Frequently Asked Questions
Q1: What materials can be tested using the DIN Abrasion Resistance Tester?
A1: The tester is specifically designed to determine the wear performance of elastic materials, rubber, tires, conveyor belts, and shoe soles.
Q2: Which international standards does this DIN Abrasion Tester comply with?
A2: It complies with a wide range of global standards, including DIN-53516, ISO 4649, ASTM D5963, JIS-K6369, JIS K6264-2, EN ISO 20344 (section 8.3), and BS903-A9 Method A, among others.
Q3: What are the specimen dimensions required for testing?
A3: The standard specimen dimension required for testing is a diameter of ø16.2 mm with a thickness range of 6 to 10 mm.
Q4: Does the machine feature automated controls during operation?
A4: Yes, the machine is equipped with a digital counter that allows it to automatically stop once the pre-set test stroke or cycles are finished.
Q5: What standard weights are provided with the tester?
A5: The instrument comes standard with a 2.5N holder, and includes individual 2.5N and 5N weights as standard accessories to adjust the touching pressure.
Q6: What is the purpose of the standard cutting die included in the package?
A6: The standard cutting die is used to precisely cut and prepare specimen samples to the required ø16.2 mm diameter from raw materials before testing.